Skip to content
Home › Blog › Orbital Events › Laser Links Between Satellites: Speed, Pointing and Latency
🛰️ Orbital Events

Laser Links Between Satellites: Speed, Pointing and Latency

NASA’s Psyche spacecraft photographed in December 2021, with the Deep Space Optical Communications flight laser transceiver mounted on its structure.
Image: NASA/JPL
Quick answer · as of 22 Nov 2026

Laser links let satellites relay data without sending every hop through a ground station. Their value depends on precise pointing, network routing and the distance traffic must travel.

Key figures · as of 22 Nov 2026 · Orbital Radar tracking data
Active satellites16,721
Starlink active9,750
Catalogued objects32,150
Active close approaches17
People in space10

Laser links between satellites send data directly from one spacecraft to another using light, allowing traffic to cross space without returning to a ground station at every hop. These optical inter-satellite links (OISLs), also called optical crosslinks, are used by Starlink and Amazon Leo to connect spacecraft into networks.

Starlink had 9,750 operational satellites as of 22 November 2026, according to Orbital Radar tracking data. The constellation can be explored on the Orbital Radar Starlink Tracker, but its scale alone does not tell you how quickly an internet request will reach its destination.

A high-capacity laser connection does not automatically produce a low-latency internet service: capacity describes how much data a link can carry, while latency is the delay in delivering it. Keeping beams accurately pointed, choosing routes between moving spacecraft, reaching a suitable ground connection and managing congestion all matter. The useful question is therefore not just how fast a laser link is, but how the whole journey performs.

Laser links between satellites carry data by encoding information onto laser light and directing it to another spacecraft. Electronics control changes in the light to represent data, transmitting optics aim the beam, and a receiving telescope collects it. A detector converts the received light into electrical signals, which electronics recover as data.

This direct spacecraft-to-spacecraft connection is an optical inter-satellite link (OISL), also called a crosslink. Orbital Radar’s optical inter-satellite link glossary explains the terminology; Starlink and Amazon Leo both use these links. A user connection instead joins a customer’s terminal to a satellite, while a gateway connection joins the satellite network to terrestrial networks.

Crosslinks allow spacecraft to form a mesh network: satellites forward data through neighbouring satellites rather than operating as isolated relays. Traffic can therefore cross a constellation in space without passing through a ground station between each satellite hop. Orbital Radar’s explanation of how satellite internet works puts these connections into the wider journey between a user and the internet.

Orbital Radar tracking data records 16,721 active satellites in orbit as of 22 November 2026. Starlink accounts for 9,750 active satellites on that date, according to Orbital Radar tracking data. These are fleet counts, not counts of spacecraft equipped with optical crosslinks.

📡 Enjoying this? Get posts like this weekly.

How do satellites keep laser beams on moving targets?

Satellites keep laser beams on moving targets through acquisition, pointing and tracking: finding the other spacecraft, aiming towards it and continually correcting the beam as both move. An optical inter-satellite link (OISL) requires this alignment to carry data directly between spacecraft.

Predicted orbital positions tell a terminal where to look, while knowledge of the spacecraft’s orientation translates that direction into an aiming command. Coarse pointing turns the spacecraft or steers the terminal towards its partner; fine-steering optics then make smaller, faster corrections using feedback from received light.

Orbital Radar tracking data lists 16,721 active satellites as of 22 November 2026. Orbital paths can be explored in the Orbital Radar satellite library, although an orbit alone does not reveal where a spacecraft’s laser terminal is pointing.

The transmitter must also apply point-ahead compensation: aiming towards where the receiver will be when the light arrives, rather than simply where it appears to be. Because the incoming light also took time to travel, tracking the arriving beam and aiming the outgoing beam require slightly different directions.

Orbital Radar tracking data lists 9,750 active Starlink satellites as of 22 November 2026. For networks using laser links, maintaining each connection requires continuous adjustment, not a fixed pointing command.

Vibration can shake the beam off target, while thermal distortion—changes in shape caused by heating and cooling—can shift optical alignment. Changing geometry can move a partner beyond the terminal’s steering range or behind Earth. A lost link may require reacquisition, while traffic takes another available route through the network.

Laser links between satellites have no single data rate: capacity depends on the equipment and operating conditions. Light travels at approximately 300,000 kilometres per second in a vacuum, but that propagation speed is different from the rate at which a link carries data.

Data rate, measured in bits per second, describes how much information can cross a link each second. Latency is the time information takes to travel from sender to receiver, including transmission, propagation and processing delays. A higher data rate does not make light travel faster; light also travels more slowly through optical fibre than through a vacuum.

Useful throughput—the rate at which usable data arrives—depends on transmitter power, beam spread, receiver aperture (the opening collecting incoming light), satellite separation and detector performance. Error correction adds redundant information to recover damaged data, using some capacity that would otherwise carry traffic.

A terminal’s link capacity is not an individual customer’s bandwidth. Traffic shares network resources, and the customer’s connection also depends on access links and available capacity elsewhere along the route. Orbital Radar’s optical inter-satellite link glossary explains these direct connections, used by Starlink and Amazon Leo.

Starlink had 9,750 active satellites on 22 November 2026, according to Orbital Radar tracking data. Across all operators, 16,721 satellites were active on 22 November 2026, according to Orbital Radar tracking data. Those fleet totals describe network scale, not a universal laser-link speed or a customer bandwidth guarantee.

Laser crosslinks reduce latency when the complete route through space is faster than the available ground route—not simply because part of the journey uses lasers. Long-distance traffic can benefit because light travels faster through vacuum than through optical fibre, but an indirect orbital path or poorly placed ground exit can erase that advantage.

A one-way latency budget adds the user uplink, propagation across each inter-satellite hop, the ground downlink and terrestrial routing to the destination. It must also include processing at terminals, satellites and routers, plus time spent in queues awaiting transmission. An optical inter-satellite link (OISL) carries data directly between satellites; it does not remove those other delays.

For a nearby destination, sending traffic down to a local gateway may be quicker than carrying it across several satellites before returning to Earth. For a distant destination, several crosslinks may avoid a longer fibre route, provided the constellation offers a competitive path and a ground exit close to the destination.

Starlink states service latency of 20–50 milliseconds: useful service-level context, not a measurement of one laser link or a guarantee for every journey. One-way delay measures travel to the destination; round-trip time includes the return journey, potentially over a different route, so the terms are not interchangeable.

Starlink had 9,750 operational satellites on 22 November 2026, according to Orbital Radar tracking data. Orbital Radar's live catalogue lists 16,721 active satellites in orbit today. The Orbital Radar Starlink Tracker provides constellation context, but satellite positions alone cannot establish which route a packet takes or how long it queues.

Starlink and Amazon Leo both use optical inter-satellite links (OISLs): laser connections that carry data directly between satellites. Starlink combines these links with low Earth orbits roughly 480–570 kilometres above Earth, creating a space-based backbone for routing internet traffic.

Starlink has 9,750 operational satellites as of 22 November 2026, according to Orbital Radar tracking data. The customer terminal communicates with a satellite by radio, not laser; optical crosslinks carry traffic between satellites after that initial connection. Orbital Radar’s Starlink Tracker shows the constellation’s distribution around Earth, rather than the route taken by an individual connection.

Crosslinks allow traffic to travel over oceans or regions far from an available gateway (a ground station connecting the satellite network to terrestrial networks). Instead of immediately returning to Earth, data can pass between satellites until it reaches one with a suitable ground connection. That extends routing options; it does not remove the need for gateways or other ground infrastructure.

Amazon Leo has been the name of Amazon’s low Earth orbit broadband constellation since November 2025, replacing Project Kuiper, as recorded in Orbital Radar’s live catalogue. It also uses optical inter-satellite links, following the same broad network principle as Starlink.

Constellation size alone cannot establish route availability, capacity or consumer performance. Those depend on which satellites can connect, available link capacity, traffic demand and gateway access—not simply how many spacecraft are in orbit.

Close-up of a PEACOQ detector, a compact, highly sensitive JPL device designed to count individual photons at extremely high rates.
This close-up photograph shows an exquisitely sensitive single Performance-Enhanced Array for Counting Optical Quanta (PEACOQ) detector, which is being developed at JPL to detect single photons at an · Image: NASA/JPL

Military constellations need laser links to move information between spacecraft without relying on a nearby ground relay for every hop. The US Space Development Agency’s Transport Layer is built around optical crosslinks: direct laser connections between satellites. Here, a transport layer means a network that moves data between users and systems.

An optical inter-satellite link (OISL) allows information to travel across that network in space before reaching a suitable ground connection. If a spacecraft or connection becomes unavailable, a network with sufficient crosslinks and routing capability can offer an alternative path. This reduces dependence on individual relay points; it does not guarantee uninterrupted communications.

Interoperability means more than fitting each spacecraft with a laser terminal. Terminals must use compatible signalling, share acquisition procedures—the steps needed to find and establish contact with another terminal—and connect through compatible network interfaces. Establishing an optical connection is not enough unless the spacecraft can exchange useful data.

Narrow laser beams can make interception or interference harder in some geometries because an observer or interferer must reach the relevant beam path or receiver. They do not replace encryption, authentication or protection of ground systems. A tightly directed link is not automatically a secure network.

Orbital Radar tracking data records 16,721 active satellites on 22 November 2026. Orbital Radar’s live catalogue contains 32,150 objects, including debris, on the same date. Those totals describe the wider orbital population, not military network capacity; Orbital Radar’s satellite library provides context on the spacecraft sharing that environment.

What can interrupt an optical satellite network?

Lost line of sight, pointing errors and unavailable laser terminals can interrupt laser links between satellites. Clouds and atmospheric turbulence affect optical space-to-ground paths, but not a crosslink (a direct connection between satellites) that stays above the atmosphere.

Earth can block the straight path between satellites. As satellites move, their changing neighbour geometry determines which connections are possible; a suitable neighbour also needs an available terminal (the equipment that transmits and receives the beam). Being nearby does not guarantee a usable link.

Background sunlight can make a faint incoming signal harder to distinguish. Pointing errors can move the narrow beam off its receiver, while insufficient received light can degrade or break the connection. The severity depends on terminal design and geometry, including distance and the receiver’s viewing direction relative to the Sun.

Orbital Radar tracking data lists 16,721 active satellites as of 22 November 2026. Starlink accounts for 9,750 active satellites as of 22 November 2026, according to Orbital Radar tracking data. These fleet totals, contextualised on the Orbital Radar Starlink Tracker, do not establish which optical links are operating.

Rerouting traffic and handing connections between changing neighbours are therefore essential network functions. An alternative route may have less available capacity or greater delay; another visible satellite is not necessarily an equivalent replacement.

A functioning optical backbone does not make the entire internet connection weatherproof. Optical ground links remain vulnerable to cloud, while rain can weaken radio links serving users or gateways, depending on their frequency and design.

What can you check live on Orbital Radar?

You can check displayed satellite positions and constellation populations on Orbital Radar, but not whether particular laser links are working. Orbital Radar tracking data recorded 16,721 active satellites in orbit as of 22 November 2026. That total describes the active satellite population, not the number of spacecraft equipped with optical terminals.

Open the Orbital Radar Starlink Tracker to inspect the constellation’s displayed positions and explore the moving geometry behind an orbital network. Positions show where spacecraft are relative to Earth and one another. Following that geometry helps explain why neighbouring satellites change as they travel around Earth, but proximity alone does not establish that a connection exists.

An optical inter-satellite link (OISL) sends data directly between satellites using a laser, allowing traffic to cross a constellation without passing through a ground station. A satellite map is not live laser-link telemetry: measurements reporting the connection’s actual operating state. It cannot, by itself, reveal customer packet routes, terminal status or available bandwidth.

Orbital Radar tracking data lists 9,750 active Starlink satellites. The Starlink population page provides context for that constellation count. Keep this separate from any claim about working optical links: counting satellites does not tell you how many connections are established, which pairs are exchanging data, or how much traffic those connections can carry.

Long-exposure image from NASA’s Galileo spacecraft showing two sets of laser pulses transmitted from Earth across 1.4 million kilometers.
Two sets of laser pulses transmitted from Earth to a spacecraft over a distance of 1.4 million kilometers 870,000 miles in a communications experiment are shown in this long-exposure image made by NAS · Image: NASA/JPL

No: laser links between satellites change the route data takes, rather than remove the endpoints. Traffic can cross space without visiting an intermediate ground station, but it still needs a connection to users and, for most internet services, terrestrial networks.

Fibre provides extensive terrestrial capacity, radio links connect many users to satellites, and optical inter-satellite links (laser connections between spacecraft) add routing options through space. Starlink and Amazon Leo both use these crosslinks; they complement ground infrastructure rather than replace it.

Starlink had 9,750 active satellites on 22 November 2026, according to Orbital Radar tracking data. Across all operators, Orbital Radar tracking data recorded 16,721 active satellites on 22 November 2026.

For ships, aircraft and remote communities, crosslinks can carry traffic towards a distant ground connection when none is nearby. That can extend connectivity options, but satellite visibility alone does not guarantee service: suitable terminals, authorisation and available network capacity still matter.

Nor does a route through space automatically beat fibre on end-to-end latency (the total delay between sender and recipient). Orbital Radar’s Starlink Tracker shows the constellation’s orbital context, not a guarantee of connection quality.

For future claims, ask what improves: link capacity, end-to-end latency, coverage, resilience or cost? These are different outcomes; a gain in one does not establish a gain in the others.

Key takeaways

  • Optical inter-satellite links let Starlink and Amazon Leo relay data between spacecraft without using a ground station at every hop.
  • Laser-link capacity and internet latency are different measures, and a faster optical connection does not guarantee a faster end-to-end journey.
  • Precise acquisition, pointing and tracking keep narrow beams connected while changing geometry requires handovers and alternative routes.
  • Orbital Radar’s Starlink Tracker shows constellation geometry, not live optical connections or the route taken by a customer’s data.

Frequently Asked Questions

Can you see satellite laser links from the ground?
Satellite laser links are not normally visible from the ground: systems such as Starlink use tightly directed infrared beams, outside human vision, aimed between spacecraft rather than towards observers. A visible satellite usually shines by reflecting sunlight, not because its communications laser is visible. Orbital Radar's Starlink Tracker helps identify the satellites overhead, rather than their laser beams.
Does a Starlink dish communicate with satellites using a laser?
No: a Starlink dish communicates with satellites using radio waves, while optical inter-satellite links (laser connections between spacecraft) carry traffic through space. Starlink had 9,750 operational satellites on 22 November 2026, according to Orbital Radar tracking data. The dish electronically steers its radio beam to follow satellites without needing to point a laser at them.
Can satellites from different operators exchange data over laser links?
Yes, provided their optical terminals support compatible wavelengths, signalling, pointing and communications protocols, and the operators agree to connect their networks. Starlink and Amazon Leo both use laser links within their constellations, but that does not establish that their satellites can exchange traffic directly with each other. Cross-operator connections require deliberate engineering and network coordination, not simply two satellites carrying lasers.
Are satellite laser communications encrypted?
Satellite laser communications can be encrypted, but a laser beam does not itself provide encryption. Systems such as Starlink can carry encrypted internet traffic; whether a particular inter-satellite connection also applies its own encryption depends on the network's design. Narrow beams make interception more difficult than with widely spread radio signals, but they are not a substitute for cryptographic protection.
Do laser links help satellites avoid collisions?
Laser communications links primarily move data; they are not, by themselves, collision-warning sensors or an automatic avoidance system. Orbital Radar tracking data listed 17 active close approaches being tracked on 22 November 2026. Collision avoidance depends on predicted orbits, uncertainty estimates, coordination and, when necessary, a manoeuvre; laser links could help relay that information but do not replace those processes.

Cite this article

Pick a style, then copy it or download it for your reference manager.

Orbital Radar. (2026, November 22). Laser Links Between Satellites: Speed, Pointing and Latency. Retrieved November 22, 2026, from https://orbitalradar.com/blog/laser-links-between-satellites

“Laser Links Between Satellites: Speed, Pointing and Latency.” Orbital Radar, 22 Nov. 2026, orbitalradar.com/blog/laser-links-between-satellites. Accessed 22 Nov. 2026.

Orbital Radar (2026) Laser Links Between Satellites: Speed, Pointing and Latency. Available at: https://orbitalradar.com/blog/laser-links-between-satellites (Accessed: 22 November 2026).

Orbital Radar. “Laser Links Between Satellites: Speed, Pointing and Latency.” Last modified November 22, 2026. https://orbitalradar.com/blog/laser-links-between-satellites.

@misc{orbitalradar_blog_laser_links_between_satellites,
  author       = {{Orbital Radar}},
  title        = {Laser Links Between Satellites: Speed, Pointing and Latency},
  year         = {2026},
  month        = nov,
  howpublished = {\url{https://orbitalradar.com/blog/laser-links-between-satellites}},
  url          = {https://orbitalradar.com/blog/laser-links-between-satellites},
  urldate      = {2026-11-22},
  note         = {Accessed 2026-11-22}
}
TY  - ELEC
AU  - Orbital Radar,
TI  - Laser Links Between Satellites: Speed, Pointing and Latency
PY  - 2026
DA  - 2026/11/22
PB  - Orbital Radar
UR  - https://orbitalradar.com/blog/laser-links-between-satellites
Y2  - 2026/11/22
LA  - en
ER  - 
Download RISFor Zotero, EndNote and Mendeley

Live figures change, so keep the date you accessed the page. How to cite Orbital Radar

The live figures in this article are available as machine-readable data: download JSON (CC BY 4.0, attribute “Orbital Radar” with a link).
📡
Stay in Orbit

Get weekly space intelligence delivered to your inbox.